99
Addi
tion
al
I
nf
o
rm
at
ion
Specifications
System
Laser:
Semiconductor laser
Channel coverage:
PAL/SECAM (B/G, D/K, I, L)
VHF: E2 to E12, R1 to R12, F2 to F10, Italian
A to H, Ireland A to J, South Africa 4 to 13/
UHF: E21 to E69, R21 to R69, B21 to B69,
F21 to F69/CATV: S01 to S05, S1 to S20,
France B to Q/HYPER: S21 to S41
For details, see “Receivable channels” (page 81).
The above channel coverage merely ensures the
channel reception within these ranges. It does not
guarantee the ability to receive signals in all
circumstances.
Video reception:
Frequency synthesizer system
Audio reception:
Split carrier system
Aerial out:
75-ohm asymmetrical aerial socket
Timer:
Clock: Quartz locked/Timer indication:
24-hour cycle (digital)/Power back-up
duration: 1 hour
Video recording format:
MPEG Video
Audio recording format/applicable bit
rate:
Dolby Digital 2 ch/256 kbps
Inputs and outputs
LINE OUT
(AUDIO):
Phono jack/2 Vrms/10 kilohms
(VIDEO):
Phono jack/1.0 Vp-p
(S VIDEO):
4-pin mini DIN/Y:1.0 Vp-p,
C: 0.3 Vp-p (PAL)
LINE IN 1/2/3
(AUDIO):
Phono jack/2 Vrms/more than
22 kilohms
(VIDEO):
Phono jack/1.0 Vp-p
(S VIDEO):
4-pin mini DIN/Y:1.0 Vp-p,
C: 0.3 Vp-p (PAL)
DV IN:
4-pin/i.LINK S100
DIGITAL OUT (OPTICAL):
Optical output jack/
–18 dBm (wave length: 660 nm)
DIGITAL OUT (COAXIAL):
Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT
(Y, P
B
/C
B
, P
R
/C
R
):
Phono jack/Y: 1.0 Vp-p, P
B
/C
B
: 0.7 Vp-p,
P
R
/C
R
: 0.7 Vp-p
General
Power requirements:
220-240 V AC, 50/
60 Hz
Power consumption:
55 W
Dimensions (approx.):
430
×
75
×
328 mm
(width/height/depth) incl. projecting parts
Hard disk drive capacity:
250 GB
Mass (approx.):
5.0 kg
Operating temperature:
5ºC to 35ºC
Operating humidity:
25% to 80%
Supplied accessories:
Audio/video cord (1)
Power cord (mains lead) (1)
Aerial cable (1)
Remote commander (remote) (1)
R6 (size AA) batteries (2)
Specifications and design are subject to change
without notice.
Compatible colour systems
This recorder is designed to record using the PAL
colour system and play back using the PAL or
NTSC colour systems.
The signals of the SECAM colour system can be
received or recorded but played back in the PAL
colour system only. Recording of video sources
based on other colour systems cannot be
guaranteed.
