50
To playback quickly with sound (Scan Audio)
When you press
M
during playback of a title
recorded in the HDD, you can play quickly with
dialogue or sound (“x1.5” appears).
No sound is output when you press
M
two or
more times to change search speed.
To resume playback from the point where you
stopped (Resume Play)
When you press
H
again after you stop
playback, the recorder resumes playback from the
point where you pressed
x
.
To start from the beginning, press TOOLS to
select “Play Beginning,” and press ENTER.
Playback starts from the beginning of the title/
track/scene.
The point where you stopped playing is cleared
when:
– you open the disc tray (except for HDD).
– you play another title (except for HDD).
– you switch the Title List menu to Original or
Playlist (HDD/DVD-RW in VR mode only).
– you edit the title after stopping playback.
– you change the settings on the recorder.
– you turn off the recorder (VIDEO CD/CD/
DATA DVD/DATA CD only).
– you make a recording (except for HDD/DVD-
RWs in VR mode).
– you switch between JPEG and MP3.
b
Note
You cannot resume playback during TV Pause.
To play restricted DVDs (Parental Control)
If you play a restricted DVD, the message “Do
you want temporarily change parental control to
*?” appears on your TV screen.
1
Select “OK” and press ENTER.
The display for entering your password
appears.
2
Enter your four-digit password using the
number buttons.
3
Press ENTER to select “OK.”
The recorder starts playback.
To register or change the password, see “Parental
Control (DVD VIDEO only)” on page 88.
To lock the disc tray (Child Lock)
You can lock the disc tray to prevent children from
ejecting the disc.
When the recorder is turned on, hold down
x
until
“LOCKED” appears in the front panel display.
The
Z
(open/close) button does not work while
the Child Lock is set.
To unlock the disc tray, hold down
x
until
“UNLOCKED” appears in the front panel display
when the recorder is turned on.
z
Hints
• You can also use the
H
button in step 3 (page 49) to
start playback.
• Even if you select “Factory Setup” in “Options” setup
(page 91), the Child Lock remains set.
