30
Seven Basic Operations
— Getting to Know Your DVD Recorder
1. Inserting a Disc
1
Press DVD.
2
Press
Z
OPEN/CLOSE, and place a
disc on the disc tray.
3
Press
Z
OPEN/CLOSE to close the
disc tray.
Wait until “LOAD” disappears from the
front panel display.
Unused DVDs are formatted
automatically.
• For DVD-RW discs
DVD-RWs are formatted in the
recording format (VR mode or Video
mode) set by “Format DVD-RW” of
“Basic” in the “Disc Setup” setup
(page 97).
• For DVD-R discs
DVD-Rs are automatically formatted
in Video mode. To format an unused
DVD-R in VR mode, format the disc
in the “Format” setup (page 40)
before
you make a recording.
If the disc is recordable on this recorder,
you can manually re-format the disc to
make a blank disc (page 40).
2. Recording a Program
This section introduces the basic operation
to record a current TV program to the hard
disk (HDD) or to a disc (DVD). For an
explanation of how to make timer
recordings, see page 42.
1
Press HDD or DVD.
If you want to record to a DVD, insert a
recordable DVD.
2
Press CH +/– to select the channel or
input source you want to record.
3
Press REC MODE repeatedly to select
the recording mode.
Each time you press the button, the
display on the TV screen changes as
follows:
* Available when “Manual Rec. Mode” is set
to “On (go to setup)” in the “Recording”
setup (page 104).
For more details about the recording
mode, see page 121.
+
R
DVD
VCD
CD
DATA CD
-RW
VR
-RW
Video
+
RW
-R
VR
DATA DVD
-R
Video
Z
OPEN/
CLOSE
DVD
Recording/playing side facing down
+
RW
-RW
VR
-RW
Video
+
R
HDD
-R
VR
-R
Video
HDD
DVD
CH +/–
REC MODE
z
REC
x
REC
STOP
X
PAUSE
Summary of Contents for RDR-HX780
Page 1: ...3 874 363 11 1 2008 Sony Corporation RDR HX780 DVD Recorder Operating Instructions ...
Page 134: ...134 ...
Page 135: ...135 ...