46
Recording from
Connected Equipment
You can set the recorder to automatically
record programs from connected equipment
that has a timer function (such as a satellite
receiver or cable box). Connect the
equipment to the LINE IN 1 jacks of the
recorder (page 29).
When the connected equipment turns on, the
recorder starts recording a program from the
LINE IN 1 jacks.
The recording destination is HDD only.
1
Press REC MODE repeatedly to select
the recording mode.
For details about recording mode, see
page 121.
2
Select the desired audio signal when
recording a Dual Mono program.
Set “External Audio” to “Dual Mono”
and “Dual Mono Recording” to “L” or
“R” in the “Audio In” setup (page 101).
3
Set the timer on the connected
equipment to the time of the program
you want to record, and turn it off.
4
Press down
x
REC STOP on the
recorder for more than 3 seconds.
The SYNCHRO REC indicator lights up
in the front panel display and the
recorder turns off. The recorder is ready
to start Synchro-Recording.
You can also set the recorder to stand by
for Synchro-Recording by setting
“Synchro Rec.” of “Timer Recording”
to “Yes” from the System Menu.
To cancel Synchro Rec before recording
starts
Press
[
/
1
.
The SYNCHRO REC indicator in the front
panel display turns off.
To cancel Synchro Rec during recording
Press down
z
REC for more than 3 seconds.
The Synchro Rec is canceled, and the
recording continues.
To stop recording
Press
x
REC STOP. Then select “Yes” in
the confirmation display, and press ENTER.
b
Notes
• The recorder starts recording only after detecting
a video signal from the connected equipment.
The beginning of the program may not be
recorded.
• The Synchro Rec function does not work with
some tuners. For details, refer to the tuner’s
operating instructions.
• While the recorder is standing by for Synchro-
Recording, the Auto Clock Set function
(page 98) does not work.
• To use the Synchro Rec function, you must first
set the recorder’s clock correctly.
If the timer settings of a Synchro-
Recording and another timer recording
overlap
Timer recordings always have priority. The
Synchro-Recording starts only after the
timer recording has finished.
Recording from connected
equipment with a timer
(Synchro Rec.)
HDD
Synchro-
Recording
will be cut off
Timer
recording
Summary of Contents for RDR-HX780
Page 1: ...3 874 363 11 1 2008 Sony Corporation RDR HX780 DVD Recorder Operating Instructions ...
Page 134: ...134 ...
Page 135: ...135 ...
