1-24
96
Settings and Adjustments
Aerial Reception and
Language Settings
(Basic)
The “Basic” setup helps you to make tuner,
clock, and programme position settings for
the recorder.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select “SETUP,” and press ENTER.
3
Select “Basic,” and press ENTER.
The “Basic” setup appears with the
following options. The default settings
are underlined.
To turn off the display, press SYSTEM
MENU repeatedly.
Presets programme positions manually.
If some programme positions could not be set
using the “Easy Setup” function, you can set
them manually.
If there is no sound or if the picture is
distorted, the wrong tuner system may have
been preset during “Easy Setup.” Set the
correct tuner system manually in the steps
below.
1
Select “Programme Setting” in “Basic,”
and press ENTER.
2
Press
M
/
m
to select the programme
position, and press ENTER.
3
Select the item you want to change using
<
/
,
, and change the settings using
M
/
m
and press ENTER.
4
To preset another programme position,
repeat from step 2.
System
Select an available TV system (page 97).
Programme Setting
BG
Select this when in West
European countries, except
those listed in “Receivable
channels” on page 97.
DK
Select this when in East
European countries.
I
Select this when in Great
Britain/Ireland.
L
Select this when in France.
97
Set
tings
a
nd
Adj
us
tm
e
nt
s
Channel
Press
M
/
m
repeatedly until the programme
position you want is displayed.
The programme positions are scanned in the
order shown in the table below.
• If you know the number of the programme
position you want, press the number
buttons. For example, for programme
position 5, first press “0” and then press
“5.”
• To disable a programme position, enter
“00.” The disabled programme positions
will be skipped when you press PROG +/–.
• To select a cable or satellite programme
position, press
M
/
m
until the programme
position you want is displayed.
Name
Changes or enters a new station name (up to
5 characters). The recorder must receive
programme position information (for
instance, SMARTLINK information) for
station names to appear automatically.
To enter characters, see page 39.
PAY-TV/CANAL+
Sets the PAY-TV/Canal Plus channels.
For details, see page 31.
Audio
Select “NICAM” or “Standard.”
AFT
Select “On” to turn on AFT.
• If the Auto Fine Tuning function does not
work effectively, select “Off” and press
,
.
Press
M
/
m
to obtain a clearer picture, and
press
<
.
Receivable channels
* To receive broadcasts in France, select “L.”
NICAM
Normally, select this.
Standard
Select this if the sound from
NICAM broadcasts is not
clear.
On
Turns on the Auto Fine
Tuning function.
Normally, select this.
Off
Allows you to adjust the
pictures manually.
TV system
Channel coverage
BG (West European
Countries, except
those listed below)
E2 – E12 VHF
Italia A – H VHF
E21 – E69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
DK (East European
Countries)
R1 – R12 VHF
R21 – R69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
I (Great Britain/
Ireland)
Ireland A – J VHF
South Africa 4 – 13
VHF
B21 – B69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
L* (France)
F2 – F10 VHF
F21 – F69 UHF
B – Q CATV
S21 – S41 HYPER
,
continued
98
Tuning the French CATV channels
This recorder can scan the CATV channels B
to Q and the HYPER frequency channels S21
to S41. On the Channel Set menu, the
channels are indicated as S1 to S44. For
example, channel B is indicated by Channel
Set number S1, and channel Q is indicated by
Channel Set number S23 (see the table
below). If the CATV channel you want to
preset is indicated by its frequency (for
example, 152.75 MHz), refer to the table
below to find the corresponding channel
number.
After the programme positions have been set,
you can change the order of each programme
position in the display list.
1
Select “Programme Sort” in “Basic,” and
press ENTER.
2
Press
M
/
m
to select the row containing
the programme position you want to
move, and press ENTER.
• To display other pages for programme
positions 4 to 99, press
M
/
m
repeatedly.
Corre-
sponding
channel
Channel
Set
number
Receivable
Frequency
range (MHz)
B
S1
116.75–124.75
C
S2
124.75–132.75
D
S3
132.75–140.75
D
S4
140.75–148.75
E
S5
148.75–156.75
F
S6
156.75–164.75
F
S7
164.75–172.75
G
S8
172.75–180.75
H
S9
180.75–188.75
H
S10
188.75–196.75
I
S11
196.75–204.75
J
S12
204.75–212.75
J
S13
212.75–220.75
K
S14
220.75–228.75
L
S15
228.75–236.75
L
S16
236.75–244.75
M
S17
244.75–252.75
N
S18
252.75–260.75
N
S19
260.75–268.75
O
S20
268.75–276.75
P
S21
276.75–284.75
P
S22
284.75–292.75
Q
S23
292.75–300.75
S21
S24
299.25–307.25
S22
S25
307.25–315.25
S23
S26
315.25–323.25
S24
S27
323.25–331.25
S25
S28
331.25–339.25
S26
S29
339.25–347.25
S27
S30
347.25–355.25
S28
S31
355.25–363.25
S29
S32
363.25–371.25
S30
S33
371.25–379.25
S31
S34
379.25–387.25
S32
S35
387.25–395.25
S33
S36
395.25–403.25
S34
S37
403.25–411.25
S35
S38
411.25–419.25
S36
S39
419.25–427.25
S37
S40
427.25–435.25
S38
S41
435.25–443.25
S39
S42
443.25–451.25
S40
S43
451.25–459.25
S41
S44
459.25–467.25
Programme Sort
Corre-
sponding
channel
Channel
Set
number
Receivable
Frequency
range (MHz)
99
Set
tings
a
nd
Adj
us
tm
e
nt
s
3
Press
M
/
m
until the selected programme
position row moves to the desired
programme position.
The selected programme position is
inserted at the new programme position.
4
Press ENTER to confirm the setting.
5
To change the programme position of
another station, repeat from step 2.
Some broadcast systems provide a Teletext
service* in which complete programmes and
their data (title, date, programme position,
recording start time, etc.) are stored day by
day. A TV guide page corresponds to each
day of the week. When recording a
programme, the recorder automatically takes
the programme name from the Teletext pages
and stores it as the title name. The TV guide
page numbers depend entirely on the
broadcast itself and may be subject to change.
If so, you may have to set those TV guide
page numbers manually in the TV Guide
Page menu.
* Not available in some areas.
1
Select “TV Guide Page” in “Basic,” and
press ENTER.
The TV Guide Page menu appears.
2
Select the programme position for which
you want to set or change the TV guide
page using PROG +/– or number buttons.
• The TV guide page numbers (Example:
P301) appear automatically when the
recorder detects them.
• If no page numbers are detected (P000),
you have to set the appropriate TV
guide page number manually.
3
Select the TV guide page number you
want to modify, and press ENTER.
4
Press the number buttons or
<
/
M
/
m
/
,
to enter the TV guide page number, and
press ENTER to confirm the setting.
• If you make a mistake, re-enter the
correct number.
• To return to the original settings, press
O
RETURN.
5
To set or change another TV guide page
number, repeat steps 3 and 4 above.
z
Hint
To view Teletext information on your TV screen
during a broadcast, switch to your TV’s tuner by
pressing TV/DVD.
Auto Programme Title Labelling
(TV Guide Page)
,
continued
Summary of Contents for RDR-HX820
Page 38: ...1 32E MEMO ...
Page 52: ...RDR HX820 HX825 MEMO 3 11 3 12E ...
Page 91: ...5 12E Pin No Pin Name I O Function Y25 VSS Digital GND ...