109
Set
tin
gs
a
nd
Adj
u
st
m
e
n
ts
You can check the signal strength and
quality of the channel.
To scan a digital channel, select a channel
using
<
/
,
, and select “Add New
Channels,” then press ENTER.
Selects whether to supply the power to the
aerial connected to the DIGITAL AERIAL
IN jack.
b
Note
If the setting keeps reverting to “Off” even when
“On” or “Auto” is selected or broadcast signals
cannot be received properly, check the
connections and try to reset the setting.
Aerial Reception
Settings (Analog Tuner)
You can make analogue tuner and
programme position settings for the
recorder.
Auto Scan
You can preset programme positions
automatically using “Auto Scan.”
Select your country/region using
<
/
,
,
and press ENTER.
The programme position order will be set
according to the country/region you set.
If any programme positions are unused or
contain unwanted channels, you can disable
them (page 110).
Download from TV
You cannot use the “Download from TV”
function when connecting your TV using the
EURO AV adapter (page 19)
For details, refer to the operating
instructions supplied with your TV.
Signal Check
Aerial Power
On
The power is always supplied
to the aerial connected to the
DIGITAL AERIAL IN jack.
Auto
The power is supplied to the
aerial connected to the
DIGITAL AERIAL IN jack
when the recorder is turned
on.
Off
The power is not supplied to
the aerial connected to the
DIGITAL AERIAL IN jack.
Auto Channel Setting
,
continued
