112
AFT
• If the Auto Fine Tuning function does not
work effectively, select “Off” and press
m
.
Press
<
/
,
to obtain a clearer picture,
and press ENTER.
Sound System
Select an available TV system (page 110).
Name
Changes or enters a new station name (up to
5 characters). The recorder must receive
programme position information for station
names to appear automatically.
Press
,
, then press
<
/
,
repeatedly to
select a character.
To change the characters, press
M
/
m
to
move the cursor, and press
<
/
,
.
After the programme positions have been
set, you can change the order of each
programme position in the display list.
1
Press
M
/
m
to select the programme
position number you want to swap, and
press
,
.
• To display other pages, press
.
/
>
repeatedly.
2
Press
M
/
m
to select the programme
position number to swap for the one
selected in step 1, and press ENTER.
The programme position numbers are
swapped.
• To swap the programme position
number of another station, repeat from
step 1.
Video Settings (Video In/
Out)
You can adjust items related to the image,
such as size and colour, according to the type
of TV or tuner connected to the recorder.
Selects the colour system when picture noise
appears after you change the “Input Line
System” setting (page 107).
z
Hint
When “Input Line System” is set to “NTSC,” you
can select “Auto,” “3.58NTSC,” or “PAL-60.”
b
Note
“Input Colour System” cannot be set when
viewing digital broadcasts.
On
Turns on the Auto Fine
Tuning function.
Normally select this position.
Off
Allows you to adjust the
picture manually.
B/G
• Australia, New Zealand
D/K
Do not select this.
I
Do not select this.
L
Do not select this.
Channel Swapping
Input Colour System
Auto
Recorder automatically
detects signals of colour
systems and selects the
appropriate colour system.
PAL
Selects the PAL colour
system when “Input Line
System” is set to “PAL/
SECAM.”
SECAM
Selects the SECAM colour
system when “Input Line
System” is set to “PAL/
SECAM.”
