123
Set
tin
gs
a
nd
Adj
u
st
m
e
n
ts
b
Notes
• The PCM signals may not be output even when
you select “Auto” depending on the “Audio Out”
settings, number of audio channels, and the
HDMI-connected device.
• The “Audio Output” function is not available
when a DVI device is connected.
Other Settings (Options)
You can make other operation settings.
Adjusts the lighting of the front panel
display.
Changes the Command Mode of the
recorder to avoid interference with your
other Sony DVD recorder or player.
1
Select a Command Mode (“1,” “2,” or
“3 (Default setting)”), and press
ENTER.
Control for HDMI
On
Allows you to use the
“Control for HDMI”
function (page 21).
Off
Turns off the function.
On Screen Display
On
Automatically displays
information on the screen
when the recorder is turned
on, etc.
Off
Displays information only
when DISPLAY is
pressed.
Front Panel Display
On
Bright lighting.
Off
Turns off the lighting and
saves power consumption
when the power is off.
Command Mode
b
Note
The default command mode setting for this
recorder and the supplied remote is “3
(Default setting).”
The remote does not function if different
command modes are set for the recorder and
remote. Set the same command mode.
,
continued
