16
Use this hookup if you can receive digital terrestrial broadcasting.
With this hookup, you can record any programme position by selecting the programme
position on the recorder.
1
Disconnect the aerial cable from your TV, and connect it to DIGITAL AERIAL IN on
the rear panel of the recorder.
2
Connect DIGITAL AERIAL OUT of the recorder to the aerial input of your TV using the
supplied aerial cable.
z
Hint
When connecting to an indoor aerial, use one with a signal amplifier rated at 5 V, 30 mA. Then set “Aerial
Power” to “On” in the “Digital Tuner” setup (page 109).
A: Receiving digital terrestrial broadcasting (For digital
broadcasting)
DVD recorder
TV
to aerial input
to DIGITAL AERIAL OUT
to DIGITAL AERIAL IN
Aerial cable (supplied)
: Signal flow
Wall