49
R
e
cor
d
in
g (Fo
r
d
ig
ita
l t
e
rre
st
ri
a
l bro
adc
as
ting
)
When the timer settings overlap
• The programme that starts first has priority
and the entire programme is recorded.
• After finishing the previous recording, the
other recording starts with several tens-of-
second’s delay (when the end-time of one
recording and the start-time of another are
the same).
• When the recordings start at the same time,
only one of them will be recorded. Cancel
the timer setting for the programme that
you are not going to record.
z
Hints
• For manual timer settings, you cannot modify
the timer setting for the current recording, but
you can extend the duration of the recording time
while recording (page 46).
For timer settings using the EPG, you can
modify the timer setting for the current recording
while recording, but you cannot extend the
duration of the recording (even when recording
is stopped).
• You can move to the first row/bottom row of the
Timer List using
.
/
>
while the list is
displayed.
b
Note
Even if the timer is set, timer recordings cannot be
made while recording a programme that has
priority.
Recording from
Connected Equipment
You can record from a connected VCR or
similar device. To connect a VCR or similar
device, see “Connecting a VCR or Similar
Device” on page 28.
1
Press HDD or DVD.
If you select DVD, insert a recordable
DVD (see “1. Inserting a Disc” on
page 31).
2
Press INPUT to select an input source
according to the connection you
made.
The front panel display changes as
follows:
3
Select the desired audio signal when
recording a bilingual programme to
the HDD or DVD+RWs/DVD+Rs/
DVD-RWs/DVD-Rs (Video mode).
Set “External Audio” to “Bilingual” and
“Bilingual Recording” to “A/L” or “B/
R” in the “Audio In” setup (page 114).
4
Press REC MODE repeatedly to select
the recording mode.
For details about the recording mode,
see page 136.
5
Insert the source tape into the
connected equipment and set to
playback pause.
6
Press
z
REC.
This recorder starts recording.
+
RW
-RW
VR
-RW
Video
-R
VR
+
R
HDD
-R
Video
programme position
,
continued
