67
Er
as
in
g
a
nd
Ed
iti
n
g
z
Hint
You can exit “Multi-Mode” by pressing
,
and
selecting “Single-Mode” while selecting titles.
You can select a section (scene) in a title and
erase it. Note that erasing scenes in a title
cannot be undone.
1
After step 2 of “Erasing and Editing a
Title,” select “Edit,” and press
ENTER.
2
Select “A-B Erase,” and press
ENTER.
For the HDD, select a type of editing,
and press ENTER. For details, see
page 65.
The display for setting point A appears.
The title starts to play.
3
Select point A using
m
/
M
or
H
,
and press
X
.
• To return to the beginning of the title,
press
X
and then press
.
.
4
Select “From,” and press ENTER.
The position of point A is displayed.
5
Press
H
.
6
Select point B using
m
/
M
or
H
,
and press
X
.
7
Select “To,” and press ENTER.
The position of point B is displayed.
8
Select “Yes,” and press ENTER.
The scene is erased.
To cancel “A-B Erase”
Press
O
RETURN. The Title List appears.
z
Hint
A chapter mark is inserted after the scene is erased.
The chapter mark divides the title into separate
chapters on either side of the mark.
b
Notes
• Images or sound may be momentarily
interrupted at the point where you erase a section
of a title.
• Sections shorter than five seconds may not be
erased.
If you want to dub a long title to a disc but do
not want to reduce the picture quality, divide
the title into two shorter titles. Note that
dividing a title cannot be undone.
* Only playlist titles can be divided for DVD-
RWs/DVD-Rs in VR mode.
1
After step 2 of “Erasing and Editing a
Title,” select “Edit,” and press
ENTER.
2
Select “Divide,” and press ENTER.
For the HDD, select a type of editing,
and press ENTER. For details, see
page 65.
The display for setting the dividing
point appears.
The title starts to play.
3
Select the dividing point using
m
/
M
or
H
, and press
X
.
• To return to the beginning of the title,
press
X
and then press
.
.
Erasing a section of a title
(A-B Erase)
-RW
VR
HDD
-R
VR
Dividing a title (Divide)
-RW
VR
HDD
-R
VR
*
*
,
continued
