To use in MANUAL MODE
Tap [MANUAL], and then tap the desired temperature level.
In MANUAL MODE, the cooling strength is kept at the selected temperature level.
The temperature level changes as follows.
[1] (low) → [2] (medium) → [3] (strong) → [4] (maximum)
When the unit is powered by USB connection, level [4] becomes level [4+] and cooling will be stronger.
To use in WAVE MODE
When using in MANUAL MODE, tap the desired temperature level, and then tap [WAVE].
In WAVE MODE, the cooling strength goes up and down around the selected temperature level.
Note
When the following abnormalities are detected, the cooling operation automatically stops (the LED flashes in red for about 8
seconds).
The temperature inside the unit rises more than expected.
The temperature of the cooling/warming section drops more than expected.
The fan inside the unit is not working properly.
For details, refer to “
Hint
The exhaust volume of the fan is automatically controlled according to the temperature inside the unit.
You can stop cooling by pressing and holding the button on the unit for about 2 seconds. It is useful when your smartphone is
running out of battery.
You can set a series of actions to alternate between cooling and warming (MY MODE).
Related Topic
E-992-100-11(1) Copyright 2022 Sony Group Corporation
16