31
GB
“BRA
VI
A”
Sy
nc
F
e
a
tu
re
s
Using the Volume Limit
function
When the System Audio Control function is
active, and the output method changes from the
TV speaker to the stand speaker automatically,
loud sound may be output depending on the
volume level of the stand. You can prevent this
by limiting the maximum volume level.
1
Press AMP MENU.
2
Press
X
/
x
repeatedly until “SET HDMI”
appears, then press
or
c
.
3
Press
X
/
x
repeatedly until “VOL LIMIT”
appears, then press
or
c
.
4
Press
X
/
x
to select the maximum
volume level you want.
The maximum volume level changes as
follows:
5
Press AMP MENU.
The AMP menu turns off.
• This function is available only when the Control for
HDMI function is set to on.
• This function is not available when the output method
changes from the stand speaker to the TV speaker.
• We recommend that you set the maximum volume
level to a little lower than the volume you usually
listen to.
• Regardless of the maximum volume level you set, the
/– button of the stand and the remote is
operable.
• If you do not want to limit the maximum volume
level, select “MAX.”
When you turn the TV off by using the POWER
button on the TV’s remote, the stand and the
connected components turns off automatically.
• Depending on the status, the connected components
may not be turned off. For details, see operating
instructions supplied with the connected components.
Notes
Tips
MAX
y
49
y
48 ….. 2
y
1
y
MIN
Turning off the stand, TV
and the connected
compornents
(System Power Off)
Note
Downloaded From TheatreSystem-Manual.com Manuals
