– 16 –
KV-B14PD1
RM-883
3-4. G2 (SCREEN) AND WHITE BALANCE
ADJUSTMENTS
1. G2 (SCREEN) ADJUSTMENT (RV701)
1) Set the PICTURE and BRIGHTNESS to normal.
2) Put to VIDEO input mode without signals.
3) Connect R, G and B of the C board cathode to the
oscilloscope.
4) Adjust G2 (RV701) volume to the value below.
0 V
165
±
2 V
2. WHITE BALANCE ADJUSTMENTS
1) Set to Service Mode.
2) Input an entire white signal.
3) Set the PICTURE to maximum.
4) Select RDR(09) with
[1]
and
[4]
, and then set the level to 25
with
[3]
and
[6]
.
5) Select GDR(0A) and BDR(0B) with
[1]
and
[4]
and adjust the
level with
[3]
and
[6]
for the best white balance.
6) Write into the memory by pressing
[MUTING]
, then
[0]
.
