O
v
er
v
iew
Location and Function of Parts
7
GB
When you release the joystick, the camera
movement stops.
Zooming
When you turn the dial on the upper part of the
joystick clockwise, the subject becomes larger
(zoom in). When you turn it counterclockwise, the
subject becomes smaller (zoom out).
To face the camera back to the front
When you press the button on the top of the joystick
for one or two seconds with or without the menu
displayed, the pan/tilt/zoom are reset and the
camera returns to the front.
P
SHIFT button and indicators
Press this button for more than one second to select
the function of the POSITION buttons for positions
1 to 8 or positions 9 to 16.
The upper indicator lights for positions 1 to 8, and
the lower indicator for positions 9 to 16.
For the BRC-H700 or BRC-Z700 camera, hold
down the SHIFT button and press one of the
POSITION buttons. The lower indicator will light
and you can use the POSITION buttons for
positions 9 to 16. If you release the SHIFT button,
the upper indicator will light and the POSITION
buttons can be used for positions 1 to 8.
Q
L/R DIRECTION button
The camera is preset to face toward the right
whenever the joystick is inclined to the right. Hold
down this button and press POSITION button 2
(REV) to reverse the pan direction to the direction
in which you incline the joystick. To reset the
direction, hold down this button and press
POSITION button 1 (STD).
R
POWER button
Press this button to light the CAMERA button(s)
corresponding to the status of the connected
camera(s).
Blue:
The power of the camera is on.
Yellow green:
The camera is in standby mode.
Off:
No camera is connected.
Hold down this button and press CAMERA button
1 to 7 to turn on/off the power of the camera
corresponding to the pressed button.
S
CAMERA buttons
Press one of the buttons to select the camera from
among those connected. The selected CAMERA
button lights in blue.
T
POSITION buttons
You can store various camera settings such as the
pan, tilt and zoom positions to the memory of the
camera corresponding to each POSITION button,
and load the settings in the memory.
Functions of the POSITION buttons for
the EVI-D100/D100P and EVI-D70/D70P
cameras
When the EVI-D100/D100P or EVI-D70/D70P camera
is connected to this unit, the unit automatically detects
the camera model and the functions of positions 7 to 16
of the POSITION buttons change as in the following
table. This allows you the direct control of the camera
without connecting to a computer.
For details on each function, refer to the Technical
Manual of the camera.
Rear/Bottom
U
MODE selector
Select the position corresponding to the VISCA-
controllable camera to be connected.
POSITION
button
Function
Position 7
Automatic Exposure – Full Auto mode
Position 8
Automatic Exposure – Bright mode
Position 9
Digital zoom – ON
Position 10
Digital zoom – OFF
Position 11
Auto White Balance mode
Position 12
Manual White Balance mode
Position 13
One Push White Balance mode
Position 14
Auto Tracing White Balance (ATW) mode
Position 15
IR Cut-Removable (ICR) – ON
Position 16
IR Cut-Removable (ICR) – OFF
Switch position
Camera mode
0
Automatically selected (default)
1
BRC-300/300P
2
EVI-D70/D70P
3
EVI-D100/D100P
4
EVI-D30/D30P
MODE
VISCA
1
9
1
9
RS-422
ON/OFF
TALLY/CONTACT
RS-232C
CONTACT(TALLY)
!
TALLY
CONTACT
DC IN 12V
ws wd
wf wg wh wj wk
wa
