Conn
ec
tio
n
s
a
nd
Op
er
at
ions
Storing the Camera Settings in Memory – Presetting Feature
GB
18
To turn on/off the camera using this unit
As long as the camera is connected to an AC outlet, you
can turn the camera on or off with the POWER button on
this unit.
While holding down the POWER button, press the
CAMERA button corresponding to the camera whose
power you want to turn on/off.
When you turn the power off using this unit, the
POWER lamp turns off and the STANDBY lamp lights
on the camera.
Storing the Camera
Settings in Memory
– Presetting Feature
Up to sixteen combinations of settings (sixteen
positions), including camera position, zooming,
focusing, and backlighting, can be stored in the memory
of the camera using this unit.
1
Press the PAN-TILT RESET button to reset the pan/
tilt position.
2
Press the CAMERA button to select the camera
whose settings you want to preset.
To change camera group number (for IP
connection)
Press any GROUP/POSITION button while
holding down the SELECT button. (For selecting 9
to 16, select the camera group number while
holding down the SHIFT button.)
3
Adjust the position, zooming, focusing and
backlighting of the camera.
4
While holding down the PRESET button (for
POSITION 1 to 8) or the SHIFT and PRESET
buttons (for POSITION 9 to 16), press the GROUP/
POSITION button in which you want to store the
settings.
The settings are stored in the memory of the
camera.
The pressed button flashes during storing. Flashing
stops when storing is completed.
1
LOCK
JOYSTICK
KNOB
MODE
VALUE
RESET
POSITION
GROUP
MENU
GROUP
PRESET
SHIFT
BLACK
LIGHT
PAN-TILT
RESET
ONE PUSH
AWB
POWER
SELECT
AUTO
MANUAL
AUTO
ONE PUSH
AF
2
3
4
5
6
7
POSITION
CAMERA
GROUP
R
–
+
BRIGHT
B
–
+
FOCUS
NEAR
FAR
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2
4 1
RESET
RESET
POSITION
PRESET
SHIFT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Press a GROUP/POSITION button.
While holding down (for POSITION 9 to 16)
While holding down (for POSITION 1 to 8)
Summary of Contents for RM-IP10
Page 27: ......
