39
2
Press the AE button, turning it off (button
is not lit).
3
Press the IRIS, GAIN, or SHUTTER button on
the menu control block.
The setting is displayed on the LCD panel and
can be adjusted using the VALUE knob
(FUNCTION menu).
For details about the FUNCTION menu, see
“Setting Specific Functions using Shortcuts
(excluding ILME-FR7)” (page 59).
Backlight compensation
(BACKLIGHT)
Use the following procedure to compensate for
backlighting if the subject appears dark due to a
light source behind the subject.
Backlight compensation functions when AE
mode is enabled (AE button is lit).
For details about function assignments to assign
buttons, see “Assigning Functions to Assign
1
Select the target camera to control.
For details about selection, see “Selecting a
2
Press the ACTIVE button, turning it on
(button is lit), on the color adjustment
block.
3
Press the assign button (ASSIGN 1 to
ASSIGN 3) with the backlight
compensation function assignment.
BACKLIGHT is displayed highlighted on the
bottom of the LCD panel of the unit when the
button is pressed.
To cancel backlight compensation
Press the same assign button, turning it off
(button is not lit).
Note
On the BRC-H900, to turn the AE button off, also
turn this function off.
Flicker compensation (FLICKER)
Use the following procedure if there is any flicker
in the image of the subject due to the effects of
fluorescent lighting or other light sources.
For details about function assignments to assign
buttons, see “Assigning Functions to Assign
1
Select the target camera to control.
For details about selection, see “Selecting a
2
Press the ACTIVE button, turning it on
(button is lit), on the color adjustment
block.
3
Press the assign button (ASSIGN 1 to
ASSIGN 3) with the flicker compensation
function assignment.
FLICKER is displayed highlighted on the
bottom of the LCD panel of the unit when the
button is pressed.
To cancel flicker compensation
Press the same assign button, turning it off
(button is not lit).
Adjusting the white balance
Position a white object under the same lighting
conditions as the subject you want to shoot, and
zoom in on it on the screen. (You can use a white
wall or other object.)
The white balance is adjusted against the white
object.
1
Select the target camera to control.
For details about selection, see “Selecting a
2
Press the ACTIVE button, turning it on
(button is lit), on the color adjustment
block.
2
Manual adjust
Auto adjust
Summary of Contents for RM-IP500
Page 86: ...Sony Corporation ...
