19
Using the Lists
To download CD memos and information on
the presence or absence of a CD in each slot
of a CD changer
1
Move the easy scroll key to select “CD MEMO,”
then press the key to enter the selection.
The SORT menu appears in the display.
<SORT? >
NUMBER
ALPHABET
2
Move the easy scroll key to select “NUMBER” or
“ALPHABET,” then press the key to enter the
selection.
The remote starts to download the data.
LOADING
[
]
CANCEL
To cancel the downloading process
Move the easy scroll key to select “EXIT” from the
DOWNLOAD list, then press the key to enter the
selection.
Notes
• If you have changed the discs in the CD changer, be sure to
download the CD memos from the receiver or play the newly
inserted disc(s) before you select a disc from the changer.
• You can download the data only from the Sony CD changer (5,
50, 200, or 300 discs) connected to the receiver using the
CONTROL A1 cable.
Note on downloading CD memos from
the CD players
You can download CD memos only from the
CONTROL A1/A1 -compatible Sony CD players.
Depending on the CD player setting, it may take
several minutes to download CD memos. For faster
transmission, make the following CD player settings.
When an CONTROL A1/A1 -compatible Sony
CD player is connected to the receiver
Check the following:
• The category for the CD function in the IR SET list is set to
“CD1.”
• The category for all other functions in the IR SET list is not
set to “CD2.”
You can check the current category setting by selecting a
component from the function list (see page 14). Category
indication appears on the second column in the display
window.
When multiple CONTROL A1/A1 -compatible
Sony CD players are connected to the receiver
When you use two CD players, set the COMMAND MODE
selector on the back panel of the CD players to “CD1” or
“CD2,” respectively, and set the category in the IR SET list to
match the corresponding player’s COMMAND MODE
selector position (see page 16). When you use three CD
players, set the COMMAND MODE selector to “CD1,”
“CD2,” or “CD3,” respectively, and set the category in the IR
SET list to match the corresponding player’s COMMAND
MODE selector position.
When setting category for the CD players, do not skip the
number or select the same number to the multiple players.
When an CONTROL A1/A1 -compatible Sony
CD player and a non-compatible Sony CD
player are connected to the receiver
Set the COMMAND MODE selector on the back panel of the
CONTROL A1/A1 -compatible CD player to “CD2” and
set the category in the IR SET list for the player to “CD2”
(see page 16).
Set the COMMAND MODE selector on the back panel of the
non-compatible CD player to “CD1” and set the category in
the IR SET list for the player to “CD1” (see page 16).
Before downloading CD memos from the CONTROL A1/
A1 -compatible CD player, temporarily change the category
setting of the non-compatible CD player to some other
category (“VideoCD,” for example). After downloading is
completed, set the category setting of the non-compatible CD
player to “CD1” again.
When using a non-Sony CD player in
conjunction with Sony CD players
Program the remote to control the non-Sony CD player (see
page 16).
See the sections above for settings of the Sony CD players.
