RM-PJ1000. 3-858-586-02.J/E/F/G/S/I/C
14
Features
The RM-PJ1000 is a Remote Commander which operates
Sony VPH/VPL/RVP series projectors. When using two or
more projectors, the Commander controls each projector
separately or all simultaneously if they are assigned the
index numbers set on each projector or the IFB-101
interface board installed on each projector. The Commander
is also used as a wireless Commander for projectors
equipped with a remote control detector. For details on
connection, refer to the instruction manual of the projector
and the IFB-101.
Voor de klanten in Nederland
Bij dit produkt zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA.
Table of Contents
Precautions ....................................................................... 14
Location and Function of Controls ................................ 15
Battery Installation .......................................................... 19
Connecting to the Projector ............................................ 20
Specifications .................................................................... 21
English
Precautions
• Should any liquid or solid object fall into the cabinet,
remove the batteries and have the unit checked by
qualified personnel before operating it further.
• Keep the unit away from extremely hot or humid places.
• Do not install the unit near heat sources such as radiators
or air ducts, or in a place subject to direct sunlight,
excessive dust or humidity, mechanical vibration or shock.
• Keep the unit away from strong magnetic field or
mechanical vibration.
• Clean the unit with a dry soft cloth, or a soft cloth lightly
moistened with a mild detergent solution. Do not use any
type of solvent, such as alcohol or benzine, which might
damage the finish.
• Save the original shipping carton and packing material;
they will come in handy if you ever have to ship your unit.
For maximum protection, repack the unit as it was
originally packed at the factory.
