19
Us
in
g
Y
o
u
r Re
m
o
te
Co
n
tr
o
l
The RM-Y808 remote control can be programmed to operate most
audio/video equipment.
The remote control comes from the factory ready to control most Sony
TVs, VCRs, DVD players, and amplifiers.
1
Find the code(s) for the manufacturer of the
device you want to operate with this remote
control.
You can find these codes on pages 20 and 21.
2
Press the CODE SET button.
The TV function indicator begins flashing.
3
Press the 0–9 buttons to input the manufacturer
code, then press the ENTER button.
The function indicator goes off, and the remote is setup to operate
that device.
4
Test the remote control.
Press the POWER button for that equipment, then press other
operation controls such as the CH (channel) +/– button.
If the device does not respond to the remote control, repeat from
step 2 and enter a different manufacturer code in step 3.
z
Tips
• Remember to aim the remote control at
the device you are trying to operate.
• To control extra VCRs, a DVD player or
an audio receiver (AMP) with the
RM-Y808 remote control, slide the
device switch to AV2, AV3, DVD or
AMP after you have set up the remote
with the correct manufacturer code.
CODE SET
1
0
1
ENTER
Setting Up the Remote Control
