Ge
tting Star
te
d
7
US
Note
There are 5CH, 4CH, and 3CH Super Audio CD. When
you play these discs, the signal does not output from all
the jacks of the ANALOG 5.1CH OUT. For details of
the playback, see the cover or instructions of the Super
Audio CD.
Connecting a stereo amplifier
or MD deck
When you connect a stereo amplifier or make an
analog connection with an MD deck, connect the
player and the component through the
ANALOG 5.1CH OUT FRONT L/R jacks.
Use an audio connecting cord for this
connection. Be sure to match the color-coded
pin to the appropriate jacks: white (left) to white
and red (right) to red.
Audio connecting cord (supplied)
Note
When a disc with the 2 channel area and multi-channel
area is played through the ANALOG 5.1CH OUT
FRONT L/R jacks, change the default playback area to
“SEL– 2ch” (2 channel playback area) (see page 10). If
you do not, the multi-channel playback area will be
automatically played back and only the signal to the
front speakers will be output. In this case, the vocals or
other sounds may not be heard, depending on the disc.
A
: To front speaker input jacks (L/R)
B
: To surround or rear speaker input jacks (L/R)
C
: To sub woofer input jack
D
: To center speaker input jack
A
B
C D
To multi-channel
amplifier, AV amplifier,
etc.
White (L)
Red (R)
To CD (Super Audio CD) or line input jacks
(L/R) on a stereo amplifier, MD deck, etc.
continued
