10
GB
Connecting a digital
component with the coaxial
digital input jack
Use a coaxial digital cable for this connection.
Be sure to turn off the power of all components
before making connections, and connect plugs
securely to prevent noise.
Coaxial digital cable (not supplied)
Note
Only the audio signals of conventional CDs can be
output from the DIGITAL (CD) OUT COAXIAL jack.
Those of Super Audio CDs (2-channel area) and DSD
discs cannot be output through the jack.
Connecting a digital
component with the optical
digital input jack
Use an optical digital cable for this connection.
When connecting the optical digital cable to the
DIGITAL (CD) OUT OPTICAL jack, push the
cable plug in until it clicks into place.
Be careful not to bend or twist the optical cable.
Optical digital cable (not supplied)
Note
Only the audio signals of conventional CDs can be
output from the DIGITAL (CD) OUT OPTICAL jack.
Those of Super Audio CDs (2-channel area) and DSD
discs cannot be output through the jack.
To CD coaxial digital input
jack on an MD deck, etc.
To CD optical digital input
jack on an MD deck, etc.
Summary of Contents for SCD-XE800
Page 1: ... 2010 Sony Corporation SCD XE800 4 193 086 11 1 Operating Instructions Super Audio CD Player ...
Page 22: ......
Page 23: ......
Page 24: ...Printed in Malaysia ...