Sony SCPH-39004 Instruction Manual Download

Page: 6 / 84

This section explains how to connect your
PlayStation

2 console to audio equipment with

digital connectors (such as Dolby Digital
optical (AC-3) output). Using digital receivers
and amplifiers, you can enjoy features such as
multi-channel sound and surround sound.

Connecting to a receiver or
amplifier, “MD (Minidisc)” deck
or “DAT (Digital Audio Tape)”
deck with a digital connector

Hook up a commercially available optical
digital cable to your audio equipment.
In the System Configuration menu, set the
“DIGITAL OUT (OPTICAL)” setting to “On.”
This is the default setting.
For details on the System Configuration menu,
see page 7.

Notes

• Refer also to the instructions supplied with the

equipment to be connected.

• You cannot directly make digital audio recordings of

discs recorded in Dolby Digital, DTS or MPEG AUDIO
format using an MD or a DAT deck.

Connecting to audio
equipment with a built-in
DTS*, Dolby Digital** or MPEG
decoder (DVD video only)

By connecting to audio equipment with a
built-in DTS, Dolby Digital or MPEG decoder
(sold separately), you can playback sound
recorded on your DVD video in Dolby Digital
(AC-3), DTS or MPEG AUDIO format to
reproduce the effect of listening in a movie
theatre or concert hall.

Connect the equipment via the DIGITAL OUT
(OPTICAL) connector using an optical digital
cable (sold separately).

Setups for the DVD player on your
PlayStation

2 console

Some setup adjustments are necessary for the
DVD player depending on the equipment to be
connected.
For details on using the Setup display, see page
15.

• When you connect audio equipment with a

built-in DTS decoder

Set “DIGITAL OUT (OPTICAL)” to “On” and
then set “DTS” to “On” in the “Audio Setup”
display.

• When you connect audio equipment with a

built-in Dolby Digital decoder

Set “DIGITAL OUT (OPTICAL)” to “On” and
then set “Dolby Digital” to “On” in the
“Audio Setup” display.

• When you connect audio equipment with a

built-in MPEG decoder

Set “DIGITAL OUT (OPTICAL)” to “On” and
then set “MPEG” to “On” in the “Audio
Setup” display.

Note

Refer to the operating and setup instructions for the audio
equipment to be connected.

* “DTS” and “DTS Digital Out” are trademarks of Digital

Theater Systems, Inc.

** Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Confidential unpublished works. © 1992-1997 Dolby
Laboratories. All rights reserved.

Connecting digital audio equipment

Connecting other digital devices

Rear panel

Receiver or amplifier,
MD deck or DAT deck

Audio equipment
with a built-in DTS,
Dolby Digital or
MPEG decoder

PlayStation

console

Optical digital cable
(sold separately)

Connecting a device using the
Universal Serial Bus (USB)
interface

The two USB connectors on the front of the
console can be used to connect USB-compatible
devices. Also refer to the instructions supplied
with the device to be connected.

Note

Not all USB-compatible products work with the
PlayStation

2 console. See the appropriate USB-

compatible product’s user manual for more information.

S400 i.LINK connector

USB connectors

Speakers

MAIN
POWER

AV MULTI OUT

DIGITAL OUT

(OPTICAL)

DIGITAL INPUT

OPTICAL

AC IN

Connecting a device using the
i.LINK interface

The S400 i.LINK connector on the front of the
console can be used to connect an
i.LINK-compatible (IEEE 1394) device. Refer
also to the instructions supplied with the
device to be connected.

The S400 i.LINK connector does not supply
power to external devices. Some external
devices that require power from the S400
i.LINK connector will not function properly
when connected to your PlayStation

2 console.

The PlayStation

2 S400 i.LINK connector on

your console supports transfer rates up to 400
Mbps. However, the transfer rate will vary,
depending upon the actual transfer rate of the
connected i.LINK-compatible device.

Note

Not all i.LINK products work with the PlayStation

console. Refer also to the appropriate i.LINK product’s
user manual for more information.

i.LINK is a trademarked version of the IEEE 1394-1995
standard and its revisions.
i.LINK and the i.LINK logo “ ” are trademarks.