14
(GB)
10 Press the
m
/
M
buttons until the vertical stripes
disappear.
Adjust so that the vertical stripes disappear.
11 Press the OK button.
The main menu appears on the screen.
12 Press the
m
/
M
buttons to select H CENTER or V
CENTER and press the OK button.
The H CENTER adjustment menu or V CENTER adjustment
menu appears on the screen.
13 Press the
m
/
M
buttons to center the test pattern on
the screen.
14 Click “END” on the screen to turn off the test
pattern.
Adjusting the color temperature
(COLOR)
You can select the color level of the picture’s white color field
from the default color temperature settings.
Also, if necessary, you can fine tune the color temperature.
You can set the desired color temperature for each mode of the
brightness of screen.
1
Press the MENU button.
The main menu appears on the screen.
2
Press the
m/M
buttons to select
(COLOR) and
press the OK button.
The COLOR menu appears on the screen.
3
Press the
m/M
buttons to select the desired color
temperature and press the OK button.
Whites will change from a bluish hue to reddish hue as the
temperature is lowered from 9300K to 6500K (default
setting).
When you select “sRGB,” the colors adjust to the sRGB
profile. (The sRGB color setting is an industry-standard color
space protocol designed for computer products.) If you select
“sRGB,” the color settings of your computer must be set to the
sRGB profile.
Notes
• If a connected computer or other equipment is not sRGB-compliant,
color cannot be adjusted to the sRGB profile.
• While COLOR is set to sRGB, you cannot adjust CONTRAST,
BRIGHTNESS or GAMMA.
Fine tuning the color temperature
(USER ADJUSTMENT)
1
Press the
m/M
buttons to select ADJUST and press
the OK button.
The USER ADJUSTMENT menu appears on the screen.
2
Press the
m/M
buttons to select R (Red) or B (Blue)
and press the OK button. Then press the
m/M
buttons to adjust the color temperature and press
the OK button.
Since this adjustment changes the color temperature by
increasing or decreasing the R and B components with respect
to G (green), the G component is fixed.
3
Press the
m/M
buttons to select
, then press the
OK button.
The new color setting is stored in memory for USER and
automatically recalled whenever USER is selected.
The main menu appears on the screen.
Changing the gamma setting
(GAMMA)
You can associate the picture’s color shade on the screen with the
picture’s original color shade.
Note
While COLOR is set to sRGB, you cannot adjust CONTRAST,
BRIGHTNESS or GAMMA.
1
Press the MENU button.
The main menu appears on the screen.
2
Press the
m/M
buttons to select
(GAMMA) and
press the OK button.
The GAMMA menu appears on the screen.
3
Press the
m/M
buttons to select the desired mode
and press the OK button.
Adjusting the sharpness
(SHARPNESS)
Adjust to sharpen the edge of images, etc.
1
Press the MENU button.
The main menu appears on the screen.
2
Press the
m/M
buttons to select
(SHARPNESS)
and press the OK button.
The SHARPNESS menu appears on the screen.
1 2 8
1 2 8
1 2 8
1 2 8 0
1 0 2 4
6 0 H z
x
/
E X I T
R
G
B
U S E R A D J U S T M E N T
