¦ Starting Wi-Fi Communications ¦ VAIO 電子マニュアル ¦ ソニー
文字サイズ
印刷
トップ > Hard > Wi-Fi > Starting Wi-Fi Communications
Task
Starting Wi-Fi Communications
You first need to establish Wi-Fi communications between your tablet device and an
access point. Make sure an access point is set up. See the operating instructions
supplied with your access point for more information.
After setting up the Wi-Fi communications, follow the steps below to turn on the Wi-Fi
setting on your tablet device.
1.
Touch @(Apps) - [@ Settings] - [Wireless & networks] - [Wi-Fi].
Note
●
To save the battery consumption, turn off the Wi-Fi power when not in use.
To stop Wi-Fi communications
1.
Operate step 1 above again to turn off the Wi-Fi setting on your tablet device.
To find networks in your range
1.
Touch @(Apps) - [@ Settings] - [Wireless & networks] - [Wi-Fi Settings].
2.
Touch [Wi-Fi] to turn on and scan for networks. If [Wi-Fi Settings] is already on,
touch [Menu @] - [Scan].
The list of the networks found within your range is displayed.
Hint
To check the MAC address of your tablet device or other Wi-Fi details, touch
[Menu @] - [Advanced].
3.
Touch a desired network.
4.
When needed, enter [Network SSID], [Security], and [Wireless password].
Hint
●
When you are in range and [Wi-Fi] is on, your tablet device will automatically
reconnect to available networks which have been connected before.
Copyright Sony Corporation
