Sony SHAKE5, Operating Instructions Manual

model name [SHAKE-5]

[4-462-816-

12

(1)] GB

32

GB

filename[D:\NORM'S JOB\SONY HA\SO130030\SHAKE-5 (PMRF 
02)\4462816121_GB\080ADD.fm]

masterpage:Left

The sound skips.

• Wipe the disc clean (page 36).
• Reload the disc.
• Move the unit to a place with no 

vibration (e.g., on top of a stable stand).

• Move the speakers away from the unit, 

or place them on separate stands. When 
you listen to a track with bass sounds at 
high volume, the speaker vibration may 
cause the sound to skip.

Playback does not start from the first 
track.

• Set the play mode to Normal Play 

(page 14).

The folder name, track name, file 
name and ID3 tag characters do not 
appear properly.

• The ID3 tag is not Version 1(1.0/1.1) 

and Version 2(2.2/2.3).

• The character code that can be displayed 

by this system are as follows:
– Upper cases (A to Z)
– Numbers (0 to 9)
– Symbols (< > * +, [ ] \ _)
Other characters appear as “_”.

USB device

Transferring results in an error.

• You are using an unsupported USB 

device. Check the information on the 
websites about compatible USB devices 
(page 30).

• The USB device is not formatted 

correctly. Refer to the operating 
instructions of the USB device on how 
to format.

• Turn off the system and remove the 

USB device. If the USB device has a 
power switch, turn the USB device off 
and then on again after removing it from 
the system. Then perform transferring 
again.

• If the transferring and erase operations 

are repeated multiple times, the file 
structure within the USB device 
becomes fragmented. Refer to the 
operating instructions supplied with the 
USB device on how to deal with this 
problem.

• The USB device was disconnected or 

the power was turned off during 
transferring. Delete the partially-
transferred file, and perform 
transferring again. If this does not fix the 
problem, the USB device may be 
broken. Refer to the operating 
instructions of the USB device on how 
to deal with this problem.

Audio files or folders on the USB 
device cannot be erased.

• Check if the USB device is write-

protected.

• The USB device was disconnected or 

the power was turned off during the 
erase operation. Delete the partially-
erased file. If this does not fix the 
problem, the USB device may be 
broken. Refer to the operating 
instructions of the USB device on how 
to deal with this problem.

There is no sound.

• The USB device is not connected 

correctly. Turn off the system and 
reconnect the USB device, then turn on 
the system and check if “USB A” or 
“USB B” lights up in the display panel.

There is noise, skipping, or distorted 
sound.

• You are using an unsupported USB 

device. Check the information on the 
websites about compatible USB devices 
(page 30).

• Turn off the system and reconnect the 

USB device, then turn on the system.

• The music data itself contains noise, or 

the sound is distorted. Noise may have 
entered during the transferring process. 
Delete the file, and try transferring 
again.