1-8
38
Recording TV programs
To stop recording
Press
x
STOP.
To check the remaining tape length
Press DISPLAY to display the time counter. With the display on, press DISPLAY
again to check the remaining time. The white bar indicates the current location in
relation to the entire tape length. The remaining time also appears. Press DISPLAY
to turn off the indicators.
To check the remaining tape length of a tape, set
“
Tape Length
”
in the
“
VIDEO
FUNCTION SETUP
”
menu correctly (page 84).
Maximum Recording Time
3
Press SP/EP to select the tape speed, SP or EP.
EP (Extended Play) provides recording time three times as long as SP
(Standard Play). However, SP produces better picture and audio quality.
4
Press
z
REC to start recording.
“
REC
”
appears in the display window.
Tape Length
SP
EP
T-120
2 hrs
6 hrs
T-160
2 hrs 40 mins
8 hrs
T-180
3 hrs
9 hrs
SP / EP
REC
Time counter
Remaining tape length
:
:
0 0 0 3 0 SP
:
Rem 1 3 8
39
Recording TV programs
B
asic Opera
tions
To watch another TV program while recording
To watch a DVD while recording
To save a recording
To prevent accidental erasure, break
off the safety tab as illustrated. To
record on the tape again, cover the tab
hole with adhesive tape.
Tips
• To select a channel, you can use the
number buttons on the remote commander. Enter the channel number, then press ENTER.
• You can select a video source from the LINE IN 1 or LINE-2 IN jacks using the INPUT
SELECT button.
• The display appears on the TV screen indicating information about the tape, but the
information will not be recorded on the tape.
• If you do not want to watch TV while recording, you can turn off the TV. When using a cable
box, make sure to leave it on.
Notes
• The remaining tape length may not be indicated accurately for short tapes such as T-20 or
T-30, or tapes recorded in the LP mode.
• The display does not appear during still (pause) mode or slow-motion playback.
• It may take up to one minute for the VCR to calculate and display the remaining tape length
after you press DISPLAY.
• You cannot record a DVD to a VCR tape.
1
Press TV/VIDEO to display “TV” in the display window.
2
If your TV is connected to the VCR using A/V connections, set the TV to the
TV’s antenna input; if not, skip this step.
3
Select another channel on the TV.
1
Press SELECT DVD to control the DVD player.
2
Press
Z
and place the disc on the disc tray.
3
Press
H
PLAY.
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
Safety tab
40
Recording TV programs using the timer
Recording TV programs using the timer
You can preset up to eight programs at a
time.
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Press SELECT VIDEO to control the
• When using a cable box, turn it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the “SETUP MENU.” Stop
the DVD playback.
1
Press SET UP.
The “SETUP MENU”
appears.
You can also use the TIMER button in VIDEO
mode, then you can skip step2.
SET UP
INPUT
SELECT
V/v/B/b
ENTER
?
/
1
x
STOP
O
RETURN
CLEAR
TIMER
SELECT VIDEO
SET UP
DVD Setup
RETURN
SETUP MENU
Vv b
B
ENTER
41
Recording TV programs using the timer
B
asic Opera
tions
2
Press
V/v/B/b
to select
(
Set Timer
Recording), then press ENTER.
The program menu appears.
3
If necessary, press
V/v
to select the row that is to be set.
4
Set the channel number, start and stop time,
date, and tape speed:
1
Press
b
to flash each item in turn.
2
Press
V/v
to set each item.
To correct a setting, press
B
to return to that
setting and reset.
To record from a source connected to the LINE IN 1 or LINE-2 IN jacks,
press INPUT SELECT or
V/v
to display “L1 ” or “L2” in the “CH”
position.
To record the same program every day or the same day every week, press
v
while the date is flashing. For details, see “Daily/weekly recording” below.
To use the Auto Tape Speed function, press
v
to display “AUTO” in the
“SPD” position. For details, see “To use the Auto Tape Speed function” on
page 42.
5
Press
O
RETURN to confirm the setting.
The
indicator appears in the display window.
To enter another setting, press
V/v
to select the next row and repeat step 4.
Press CLEAR repeatedly to cancel the setting.
6
Press
O
RETURN repeatedly to exit the menu.
The DVD-VCR stands by for recording (you do not have to turn off the
DVD-VCR). When using a cable box, leave it on.
ENTER
CH START END
DATE
SPD
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
RETURN
v
V
b
B
B
ENTER
ENTER
INPUT
SELECT
CH START END
DATE
SPD
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
– – – : – –
– : – –
– – –
--
RETURN
v
V
b
B
B
3 5 8 : 0 0
9 : 0 0
9 / 3 0 SP
PM
PM
RETURN
CLEAR
RETURN
continued
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
