2-18
1
3 SCREWS
2
PLATE GROUND
DECK
3
ASS'Y CYLINDER
1
ASS'Y
SLIDER S
2
ASS'Y
SLIDER T
2-4-23 Ass’y Slider S, T Removal
1) Move the Ass’y Slider S, T
1
,
2
to slot, and then lift it to
remove. (Refer to arrow)
Fig. 2-36 Ass’y Slider S, T Removal
2-4-24 Plate Ground Deck, Ass’y Cylinder Re-
moval
1) Remove the 3 Screws
1
.
2) Lift the Plate Ground Deck
2
.
3) Lift the Ass’y Cylinder
3
.
Assembly:
1) Match the 3 holes in the bottom of Ass’y Cylinder
3
to the 3
holes of Main Base as attending not to drop or knock the Ass’y
Cylinder
3
.
2) Tighten the 1 Screw
1
.
3) Match the Plate Ground Deck
2
to the Hole of Base Main.
4) Tighten the other 2 Screws
1
.
Note:
1) Take care not to touch the Ass’y Cylinder
3
and the tape guide
post at reinstalling.
2) When reinstalling, Don't push down too much on Screw Driver.
Fig. 2-37 Plate Ground Deck, Ass’y Cylinder Removal
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
