1-9
40
Recording TV programs using the timer
2
Press
V/v/B/b
to select
(
Set Timer
Recording), then press ENTER.
The program menu appears.
3
If necessary, press
V/v
to select the row that is to be set.
4
Set the channel number, start and stop time,
date, and tape speed:
1
Press
b
to flash each item in turn.
2
Press
V/v
to set each item.
To correct a setting, press
B
to return to that
setting and reset.
To record from a source connected to the LINE IN 1 or LINE-2 IN jacks,
press INPUT SELECT or
V/v
to display “L1 ” or “L2” in the “CH”
position.
To record the same program every day or the same day every week, press
v
while the date is flashing. For details, see “Daily/weekly recording” below.
To use the Auto Tape Speed function, press
v
to display “AUTO” in the
“SPD” position. For details, see “To use the Auto Tape Speed function” on
page 41.
5
Press
O
RETURN to confirm the setting.
The
indicator appears in the display window.
To enter another setting, press
V/v
to select the next row and repeat step 4.
Press CLEAR repeatedly to cancel the setting.
6
Press
O
RETURN repeatedly to exit the menu.
The DVD-VCR stands by for recording (timer recording will operate
properly regardless if the DVD-VCR power is on or off). When using a
cable box, leave it on.
41
Recording TV programs using the timer
Ba
sic
O
p
er
at
ions
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press
x
STOP.
Daily/weekly recording
In step 4 above, press
v
to select the recording pattern. Each time you press
v
, the
indication changes as shown below. Press
V
to change the indication in reverse order.
MO~FR
t
SUN’S
t
MON’S
t
.....
t
SAT’S
t
1 month later
t
(dates count
down)
t
the current date
To use the Auto Tape Speed function
When you are recording a program in the AUTO mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed to
the EP mode. Note that some noise will appear on the picture when the tape speed is
changed. If you want to keep the tape speed, select SP. To operate this function, set
“Tape Length” in “VIDEO FUNCTION SETUP” menu correctly (page 86).
To watch another TV program after setting the timer
To watch a DVD after setting the timer
Tips
• To set the channel, you can also use
V/v
.
• If the indicator appears, the timer settings overlap. To check, change or cancel the program
setting, repeat the steps of “Recording TV programs using the timer” on page 39.
• If the
indicator appears, this means that the VCR is currently recording this program.
• You can also do the following tasks while the VCR is recording:
– Reset the counter (page 35).
– Display tape information on the TV screen (page 37).
1
Press TV/VIDEO to display “TV” in the display window.
2
If your TV is connected to the VCR using A/V connections, set the TV to the
TV’s antenna input; if not, skip this step.
3
Select another channel on the TV.
1
Press SELECT DVD to control the DVD player.
2
Press
Z
and place the disc on the disc tray.
3
Press
H
PLAY.
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
42
Checking/changing/canceling timer settings
Checking/changing/canceling timer
settings
1
Press SET UP when the DVD player is in stop
mode.
The “SETUP MENU” appears.
You can also use the TIMER button in VIDEO
mode, then you can skip step 2.
SET UP
V/v/B/b
ENTER
?
/
1
O
RETURN
CLEAR
TIMER
43
Checking/changing/canceling timer settings
Ba
sic
O
p
er
at
ions
When the timer settings overlap
The program that starts first has priority and the second program starts recording only
after the first program has finished. If the programs start at the same time, the
program listed first in the menu has priority.
2
Press
V/v/B/b
to select
“Set Timer Recording”, then press ENTER.
• If you want to change a setting, go on to the next step.
• If you do not need to change the settings, press
O
RETURN repeatedly
to exit the menu, then turn off the VCR to return to recording standby.
3
Press
V/v
to select setting you want to change
or cancel.
• To change the setting, press
B
/
b
to flash the
item you want to change, and press
V
/
v
to
change it.
• To cancel the setting, press CLEAR.
4
Press
O
RETURN to confirm the setting.
The
indicator appears in the display window.
5
Press
O
RETURN repeatedly to exit the menu.
The DVD-VCR stands by for recording (you do not have to turn off the
DVD-VCR). When using a cable box, leave it on.
Will be cut off
Program 1
Program 2
Summary of Contents for SLV-D300P Operating Instructions (SLVD300P)
