48
Recording TV programs using the timer
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press
x
STOP.
Daily/weekly recording
In step 2 above, press
v
to select the recording pattern. Each time you press
v
, the
indication changes as shown below. Press
V
to change the indication in reverse order.
Mo~Fr
t
Sun’s
t
Mon’s
t
.....
t
Sat’s
t
1 month later
t
(dates count down)
t
the current date
2
Set the channel number, start and stop times,
date, and tape speed:
1
Press
b
to select each item in turn.
2
Press
V/v
to set each item.
To correct a setting, press
B
to return to that
setting and reset.
• To record from a source connected to the
LINE IN 1 or LINE-2 IN jacks, press INPUT SELECT or
V/v
to display
“L1 ” or “L2” in the “CH” position.
• To record the same program every day or the same day every week, press
v
while the date is flashing. For details, see “Daily/weekly recording” on
• To use the Auto Tape Speed function, press
v
to display “Auto” in the
“SPEED” position. For details, see “To use the Auto Tape Speed
function” on page 49.
3
Press ENTER to confirm the setting.
To enter another setting, press
V/v
to select the next row and repeat step 2.
Press CLEAR repeatedly to cancel the setting.
4
Press ENTER to confirm all settings.
5
Press
?
/
1
to turn off the DVD-VCR.
The
indicator appears in the display window and the VCR stands by for
recording.
To record from a decoder or other source, leave the connected equipment
switched on.
CH START
END
DATE
RETURN
SPEED
v
V
b
B
35
CLEAR
