60
US
Audio Setup
Menu choices
• Dolby Digital
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
• DTS
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
• Audio DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to “Audio DRC.” This affects the output from the following jacks:
– LINE OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (COAXIAL)/HDMI OUT jack only when “Dolby Digital”
is set to “D-PCM”.
The default setting is indicated in bold print.
• Audio (HDMI)
Selects the type of audio signal output from the HDMI OUT jack.
4
Press
B/b
to select an item.
5
Press SET UP to exit the menu.
D-PCM
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Dolby Digital
Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
Off
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
On
Select this when the player is connected to an audio component
with a built-in DTS decoder.
Standard
Normally select this positon.
Wide Range
Gives you the feeling of being at alive performance.
Auto
Normally select this position. Outputs audio signals according
to the “Dolby Digital” or “DTS” settings (page 60).
PCM
Converts Dolby Digital or DTS to PCM.
