48
Recording TV programmes using the timer
To use the Auto Tape Speed function
In step 4, press
v
to select “Auto.” When you are recording a programme in the SP
mode and the remaining tape length becomes shorter than the recording time, the
recording tape speed is automatically changed to the LP mode. Note that some noise
will appear on the picture when the tape speed is changed. To operate this function
correctly, the “Tape Select” setting in the “VIDEO SETUP” menu must be accurate
(see page 101).
Tips
• To check, change, or cancel the programme setting, see “Checking/changing/cancelling timer
settings” on page 49.
• You can also display the timer programming menu by first pressing SET UP, then
V/v
to
select
(TIMER) and ENTER in step 2.
Note
• The
indicator flashes in the display window when you press
?
/
1
with no tape inserted.