background image

Basic Operations

21

Basic Operations

To use the time counter

At the point on the tape that you want to find later, press CLEAR. The
counter in the display window resets to “0:00:00.”  Search for the point
afterwards by referring to the counter.

To display the counter on the TV screen, press DISPLAY. Press DISPLAY
again and the counter will disappear from the TV screen.

Notes

• When you play back a tape recorded in the PAL or MESECAM colour system,

streaks may appear even if the colour system setting is set to AUTO. If so, select the
colour system PAL or MESECAM in the PAL/MESECAM option of the SET UP
MENU (see page 48 for details).

• The counter resets to “0:00:00” whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
• If a tape has portions recorded in both PAL and NTSC systems, the time counter

reading will not be correct. This is due to the difference between the counting cycles
of the two colour systems.

• Depending on your TV, the following may occur while playing an NTSC-recorded

tape:

– the picture is black and white
– the picture shakes
– no picture appears on the TV screen
– black streaks appear horizontally on the TV screen
– the colour density increases or decreases.

• Tapes recorded in the LP mode of other NTSC system VCRs can be played back on

this VCR, but the picture quality cannot be guaranteed.

• While setting the menu on the TV screen, you cannot use the 

H

 PLAY, 

X

 PAUSE,

M

 FF, 

m

 REW or 

x

 STOP buttons. These buttons are used for menu operations.

SP

APC

Summary of Contents for SLV-ED515PS






























































Reviews: