Additional Information
24
Additional Information
General setup
information
Attaching an external antenna connector
300-ohm to 75-ohm matching transformer
When using a 300-ohm twin lead cable for a
VHF/UHF antenna, use an antenna connector
(not supplied) to connect the antenna to the
unit.
1
Loosen the screws on the
antenna connector.
2
Wind the twin leads around the
screws on the antenna
connector.
3
Retighten the screw.
75-ohm to 300-ohm matching transformer
When using a TV with the 300-ohm VHF
terminal, use this type antenna connector (not
supplied) to connect the 75-ohm coaxial cable
to the TV.
1
Connect the 75-ohm coaxial
cable to the antenna connector.
2
Attach the 300-ohm Y type
terminal to the TV.
Attaching a UHF/VHF band mixer
When using both a 75-ohm coaxial cable and a
300-ohm twin lead cable for a VHF/UHF
antenna, use a VHF/UHF band separator/
mixer (not supplied) to connect the antenna to
the unit.
1
Loosen the screws on the mixer.
2
Wind the twin leads around the
screws on the mixer.
3
Retighten the screws.
4
Connect the 75-ohm coaxial
cable to the mixer.
300-ohm twin
lead cable
Antenna
connector (not
supplied)
Antenna connector
(not supplied)
to the 300-ohm VHF terminal
on the TV
75-ohm coaxial
cable
75-ohm coaxial
cable
300-ohm twin
lead cable
UHF/VHF
band
separator/
mixer (not
supplied)