5-19
3-13-2. BRAKE CONTROL LEVER AND BRAKE
ACT LEVER ASSEMBLY (See Fig. 3-13-2)
1) Refer to section 3-2 and remove the mechanism unit.
2) Refer to section 3-15 and remove the wheel gear 2.
3) Refer to sections 3-12-1, then remove the reel belt and
the reel pulley.
4) Remove the clamp
1
, then remove the wheel gear 1
2
.
5) Remove the clutch change spring
3
.
6) Remove the clamps
4
and
5
, then remove the brake
control lever
6
. Remove the clamp
4
on the topside of
the mechanlsm chassis.
7) Remove the brake return spring
7
.
8) Refer to section 3-8 and remove the worm gear assem-
bly.
9) Remove the clamp
8
and clamp
5
, then remove the
brake act lever assembly
9
. To maintain the perfor-
mance of the brake act lever assembly
9
, do not
disassemble it.
ASSEMBLY NOTES:
1. Apply grease (SGL-505) to the shafts
0
and
!¡
, to the
teeth of the wheel gear 1
2
. and to the pin
!™
of the
brake control lever
6
.
2. Put the pin
!£
of the brake control lever
6
into the cam
groove
!¢
of the crescent slide.
3. Before fitting the wheel gear 1
2
, align the hole
!
∞
with
the hole
!§
on the mechanism chassis.
4. Refer to section 3-15 and align the wheel gear 2.
!£
Pin
!™
Pin
6
Brake control lever
8
Clamp
5
Clamp
0
Shaft
!¡
Shaft
!§
Hole
4
Clamp
!∞
Hole
1
Clamp
2
Wheel
gear 1
3
Clutch change
spring
9
Brake act
lever assembly
7
Brake return
spring
!¢
Cam
groove
Fig. 3-13-2
3-13-3. S BRAKE ACT SLIDE AND BT SPRING
LEVER ASSEMBLY
(See Figs. 3-13-3 and 3-13-4)
1) Refer to section 3-16 and remove the crescent slide.
2) Refer to section 3-12-1 and remove the friction gear
assembly.
3) Slide the S brake act slide
1
in the direction of the
arrow
A
, then remove it.
4) Refer to section 3-11 and remove the BTspring.
5) Press the BTspring lever assembly
2
until it touches
the pin
3
, then remove it.
ASSEMBLY NOTES:
1. Apply grease (SGL-505) to the shaft
4
shown in Fig. 3-
13-3, and to the BT spring lever assembiy
2
and the S
brake act slide
1
shown in Fig. 3-13-4.
2. After mounting the BT spring lever assembly
2
on the
Shaft
4
, hook the BT spring onto the clamp
5
and
press it until it touches the pin
6
.
3. Make sure that the clamps
7
,
8
and
9
have snapped
Into the S brake act slide
1
. Align the arrow
0
on the
S brake act slide
1
with the arrow
!¡
on the mecha-
nism chassis.
5
Clamp
!¡
Arrow on mechanism chassis
1
S brake act slide
7
Clamp
9
Clamp
8
Clamp
3
Pin
6
Pin
A
4
Shaft
0
Arrow
2
BT spring
lever
assembly
Fig. 3-13-3
Apply grease
Apply grease
Apply grease
2
BT spring
lever
assembly
1
S brake
act
slide
Fig. 3-13-4
Summary of Contents for SLV-L45AR
