97
Changing menu options
Ad
di
tiona
l O
p
era
tions
Changing menu options
Menu choices
Initial settings are indicated in bold print.
1
Press MENU, then select ADVANCED
OPTIONS and press OK.
2
Press
M
/
m
to highlight the option to change, then press OK.
3
Press
M
/
m
to change the setting, then press OK.
To adjust the sharpness, press
<
/
,
and press OK.
4
Press MENU to return to the original screen.
Menu option
Set this option to
AUTO ANT SELECT
•
ON
if your TV is connected only to VHF/UHF OUT on the
VCR. To play a tape, set the TV to the VCR channel (channel
3 or 4).
• OFF if your TV is connected to both VHF/UHF OUT and
LINE OUT on the VCR. To play a tape, set the TV to the VCR
input.
AUTO STEREO
•
ON
to receive stereo programs.
• OFF to reduce noise. The sound changes to monaural.
TUNER AUDIO
•
MAIN
to record the main sound on both hi-fi and normal audio
tracks.
• SAP to record the SAP (Second Audio Program) sound on both
hi-fi and normal audio tracks.
APC
•
ON
to switch on the APC (Adaptive Picture Control) function
and improve picture quality.
• OFF to switch off APC.
TAPE SELECT
•
AUTO
when using a T-160 length tape or any tape shorter than
a T-140 length tape.
• 180 when using a T-140 or T-180 length tape.
For details, see page 66.
AUTO TAPE SPEED
•
ON
to change the timer recording tape speed automatically to
the EP mode when the remaining tape length becomes shorter
than the recording time. To operate AUTO TAPE SPEED, set
TAPE SELECT correctly.
• OFF to keep the same tape speed.
SET
:
SELECT :
OK
MENU
QUIT
:
ADVANCED OPTIONS
AUTO STEREO
AUTO ANT SELECT
TUNER AUDIO
APC
TAPE SELECT
ON
MAIN
ON
ON
AUTO
AUTO TAPE SPEED
ON
FAVORITE CH
ON
SHARPNESS
L
H
RETURN
continued
