65
Synchronized Recording (SLV-SE300D1/D2 and SE480D only)
Ad
di
tiona
l O
p
era
tions
To cancel the Synchronized Recording function
Press SYNCHRO REC. The SYNCHRO REC button turns off.
To stop recording
Press
x
STOP while recording.
Recording programmes using
the Synchronized Recording
function
Before you start...
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• Set DECODER/LINE3 to LINE3 in the
OPTIONS-2 menu (see page 75).
1
Press INPUT SELECT or PROG +/– to display “L3” in the display window.
2
Set the timer on the connected equipment to the time of the programme you want
to record, then turn it off.
3
Press SP/LP to select the tape speed.
4
Hold down SYNCHRO REC for more than two seconds.
The SYNCHRO REC button lights up and the VCR stands by for recording.
The VCR automatically turns on and starts recording when it receives an input
signal from the connected equipment.
The VCR automatically stops recording when the tape reaches the end or when
the connected equipment stops transmitting an input signal.
SYNCHRO REC
SP/LP
1
2
3
4
5
6
7
8
9
0
INPUT SELECT
PROG +/–
continued
