Basic Operations
26
Enjoying the simulated
stereo sound (Virtual Stereo)
When you connect the VCR to
a stereo TV or a stereo system,
you can use the Virtual Stereo
function to give monaural
sources a simulated stereo
effect.
To activate this function, press VIRTUAL STEREO. The VIRTUAL STEREO
button lights up.
To cancel this function, press VIRTUAL STEREO again. The VIRTUAL
STEREO button goes off.
Notes
• Tapes recorded in the LP mode cannot be played back on this VCR.
• The counter resets to “0:00:00” whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
• The time counter does not appear on the TV screen when using an NTSC-recorded
tape.
• Depending on your TV, the following may occur while playing an NTSC-recorded
tape:
– The picture becomes black and white.
– The picture shakes.
– No picture appears on the TV screen.
– Black streaks appear horizontally on the TV screen.
– The colour density increases or decreases.
• While setting the menu on the TV screen, buttons for playback on the remote
commander do not function.
Playing a tape (continued)
VIRTUAL STEREO
Summary of Contents for SLV-SE30EE
Page 55: ......
