66
Searching using the index function (not available on SLV-SE430K)
Searching using the index function
(not available on SLV-SE430K)
The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
To find a specific recording by scanning (Index scan)
To search a specific recording (Index search)
To stop searching
Press
x
(stop).
1
Insert an indexed tape into the VCR.
2
Press
./>
(index search). The
VCR starts scanning each recording for
five seconds in the corresponding
direction.
3
Press
H
(play) to start playback when you find the desired point.
1
Insert an indexed tape into the VCR.
2
Press
./>
(index search) twice.
• To search ahead, press
>
(index
search) twice.
• To search backwards, press
.
(index
search) twice.
3
Press
./>
(index search) depending on the direction where your
desired programme is located.
Each time you press the button, the number increases or decreases up to
±20, respectively.
4
The VCR starts searching, and playback starts automatically from that
point.
INDEX SCAN
B B
:
INDEX SEARCH :
B B
+ 0 2
Summary of Contents for SLV-SE430K
Page 83: ......
