C
hap
te
r 2:
So
no
m
a
Edi
tor
Chapter 2: Sonoma Editor
9
When an EDL window is opened, it is maximized by default, but this is controlled via a user
preference. You can change this behavior by setting or clearing the open EDL window maximized
checkbox in the window tab of the preferences window. This window is reached via the preferences
item in the window menu.
The range of the viewable EDL window is 23:30:00 to 12:30:00, however, the usable range in which
you can work is from 00:00:00 to 12:00:00.
When an EDL has been modified but not yet saved, an asterisk is appended to its name in the title bar
and the Sonoma window menu.
The area on the left side of an EDL consists of a set of control panels. Panels are selected by clicking
on a tab, or using the
PageDown
or
PageUp
keys to cycle through them.
1
The control panels are:
Channel Controls
The channel control panel is used for recording and to control the appearance of the
ingredients in an EDL. You can bring up the channel control panel quickly by pressing
Ctrl+PageUp
.
Ingredient Editor
The ingredient editor control panel is used to edit single ingredients and groups of
ingredients in an EDL. You can bring up the ingredient editor control panel quickly by
pressing
Ctrl+Alt+I
.
Section 2.11
describes the ingredient editor.
Splice Editor
The splice editor control panel is used to adjust cross-fades between ingredients that have
been spliced together. You can bring up the splice editor control panel quickly by pressing
Ctrl+Alt+L
.
Section 2.13
describes the splice editor.
Mark Editor
The mark editor control panel is used to create and display marks in an EDL. You can bring
up the mark editor control panel quickly by pressing
Ctrl+Alt+M
.
Section 2.15
describes
marks and the mark editor.
HW Monitor
The hardware monitor control panel displays real time information about the status of the
machine. You will normally not need to view this panel. It can be useful for problem
diagnosis under the direction of a Sony field support engineer.
The channel controls are used most of the time, so this panel is described fully in the next section.
The other control panels are used for special functions and will be described later in this chapter.
2.3.2
Control Panels
1.
The
PageDown
and
PageUp
keys work irrespective of the state of the transport; however, you cannot enter the Splice
Editor with the transport running. For this reason, the Splice Editor tab is skipped as you cycle down/up the panels
with the
PageDown
/
PageUp
keys when the transport runs.