22
Press
(DSPL)
to change
the displayed items.
Press
(SOUND)
to
adjust sound
menu.
To decrease
To increase
Other operations
Note
When installing in a car without ACC (accessory)
position on the ignition key switch, press
(OFF)
for
two seconds to turn off the clock display after
turning off the engine.
Tip
While the ATA function is activated, the display
(TAPE
y
TUNER) can be changed by pressing
(DSPL)
.
OFF
Rotate the VOL control to
adjust the volume.
Press
(ATT)
to
attenuate the
sound.
Press
(OFF)
to turn
off the unit.
Changing the operative direction
The operative direction of controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press
(SOUND)
for two seconds while
pushing the VOL control.
Tip
You can also change the operative direction of
these controls with the unit (see “Changing the
sound and display settings” on page 23).
