Answering Machine Features
25
EN
Answering Machine Features
Picking up new messages
1
Call your phone from a touch-tone phone.
2
When you hear the greeting, enter
(#)
, followed by your
security code.
You hear a long confirmation beep and the greeting stops.
Following the number of messages recorded, you’ll hear the
new messages.
If there are no new messages, the phone stands by for you to
enter a control code.
3
To do other operations, enter the control code within 20
seconds (see the table below). To quit, hang up the phone.
Control codes for remote operations
To
Press
Play back messages
(#)
(2)
Repeat the current message
(#)
(1)
Skip the current message
(#)
(3)
Erase the current message
(#)
(4)
while the message is being played back
Erase all the messages
(#)
(4)
when your phone is waiting for further codes
Record a new greeting
(*)
(7)
. When you hear a long beep, start recording your
(up to one minute)
greeting. Press
(*)
(*)
to stop recording.
Turn on the answering function
(*)
(0)
Turn off the answering function
(#)
(0)
Stop the current operation
(*)
(*)
If you forgot to turn the answering function on
Call your phone and let it ring 10 times until it answers. Then the
answering function automatically turns on.
Notes
• If you have not recorded the greeting, the phone does not answer.
• If you enter a wrong security code three times, the line will be disconnected.
Tip
Cut off the Remote Control Card from the supplied Quick Start Guide and carry
it with you to see how to operate from an outside phone.
To use the toll-saver feature
Set RINGER SELECT to TS. See page 20 for details.
