— 5 —
Getting Started
14
US
Entering the area code
When you use this phone for the first time, or move to an area
that has a different area code, you must enter the area code.
Otherwise, you cannot use some functions of this phone and the
Caller ID functions.
This is also necessary because the phone must be able to select an
area code to properly dial call from the Caller ID list.
Depending on your region, enter 3-digit area code as follows:
Case 1.
If 7-digit dialing (no area code) is accepted for local calls in your area,
see “To enter your home area code” below.
If you live in an area where calls from or to other local areas can also be made
by 10-digit dialing (area code + number), you can register up to 5 local area
codes with this telephone to take advantage of this system. See “To enter the
local area code (For 10 digits phone number users)” on page 15.
Case 2.
If 10-digit dialing (area code + number) is required for
all
local calls in
your area, see “To enter the local area code (For 10 digits phone
number users)” on page 15.
To enter your home area code
1
Press
(PGM)
.
2
Turn Jog Dial down to make “HOME
AREA CODE” flash.
3
Press Jog Dial.
“ENTER AREA CODE” appears on
the display.
4
Enter the three digits of your home
area code using the dialing keys.
5
Press
(PGM)
.
You hear a long confirmation beep.
HOME AREA CODE
LOCAL AREA CODE
ENTER AREA CODE
Turn
Press
Step 4
Getting Started
15
US
Getting Started
Notes
• If the home area code is already entered, it appears on the display in step 3. To
enter a different home area code, see “To change the home area code” below.
• Do not allow more than 20 seconds to elapse during the operation procedure.
• If the area code has not been entered, calling back from the Caller ID list and
storing the Caller ID data into the Phone Directory cannot be performed.
Tips
• You may press Jog Dial instead of
(PGM)
in step 5.
• To check the current home area code, perform steps 1 to 3. The home area code
appears on the display for about 20 seconds.
To change the home area code
1
Perform steps 1 to 3 on page 14.
The current home area code appears on the display.
2
Turn Jog Dial down to erase the current home area code.
3
Enter a new home area code using the dialing keys.
4
Press
(PGM)
.
You hear a long confirmation beep.
To erase the home area code
You can erase the home area code. Perform steps 1 and 2 above, then press
(PGM)
.
The home area code will be erased, and you hear a long confirmation beep.
continued
To enter the local area code (For 10 digits
phone numbers users)
If a call matches one of the local area codes you entered, the phone number
will be registered with 10 digits in the Caller ID list (area code + number).
If a call does not match one of the local area codes you entered, the phone
number will be registered with 11 digits in the Caller ID list (1 + area code
+ number). Some regions of the country allow you to have more than one
local area code. (Up to five local area codes can be entered in this phone.)
1
Press
(PGM)
.
2
Turn Jog Dial down to make “LOCAL AREA
CODE” flash.
3
Press Jog Dial.
LOCAL AREA CODE
ONE-TOUCH A
#1 #2 #3 #4 #5
Getting Started
16
US
4
Select the number (”
#
1“ to ”
#
5“) to enter the local area code
by turning Jog Dial.
5
Press Jog Dial.
”ENTER AREA CODE“ appears on the display.
6
Enter the three digits of the local area code using the dialing
keys.
7
Press
(PGM)
.
You hear a long confirmation beep.
Notes
• If the local area code is already entered, it appears on the display in step 4. To
enter a different local area code, see “To change the local area code” below.
• Do not allow more than 20 seconds to elapse during the operation procedure.
Tips
• You may press Jog Dial instead of
(PGM)
in step 7.
• To check the current local area code, perform steps 1 to 4. The local area code
appears on the display for about 20 seconds.
To change the local area code
1
Perform steps 1 to 5 on pages 15 to 16.
The current local area code appears on the display.
2
Turn Jog Dial down to erase the current local area code.
3
Enter a new local area code using the dialing keys.
4
Press
(PGM)
.
You hear a long confirmation beep.
To erase the local area code
You can erase the local area code. Perform steps 1 and 2 above, then
press
(PGM)
.
The local area code will be erased, and you hear a long confirmation
beep.
Step 4: Entering the area code (continued)
Getting Started
17
US
Getting Started
You can choose English or Spanish as the display and the voice guidance language by
following the procedure below.
To change the language from Spanish to English
1
Press
(PGM)
.
2
Turn Jog Dial down to make
“ELEGIR IDIOMA” flash, and
then press Jog Dial.
3
Press Jog Dial.
4
Select “YES” by turning Jog Dial
to change the language, and
then press Jog Dial.
You will hear a long
confirmation beep.
5
Replace the handset on the base
unit.
To change the language from English to Spanish
1
Press
(PGM)
.
2
Turn Jog Dial down to make “LANGUAGE
SELECT” flash, and then press Jog Dial.
3
Select “ESPAÑOL” by turning Jog Dial, and
then press Jog Dial.
4
Select “SÍ” by turning Jog Dial to change the
language, and then press Jog Dial.
You will hear a long confirmation beep.
5
Replace the handset on the base unit.
Note
Do not allow more than 20 seconds to elapse during the operation procedure.
Turn
Press
ENGLISH ESPA OL
ENGLISH NO YES
ESPA OL NO S
Changing the language of the display
and the voice guidance
