– 11 –
42
US
Telephone Features
1
Press
(PGM)
.
2
Turn Jog Dial up to make “RINGER”
flash.
3
Press Jog Dial.
4
Turn Jog Dial to choose the line you
want to set the ringer type.
5
Press Jog Dial.
The current ringer type appears.
6
Press one of the dialing keys (
(1)
to
(4)
) to select a ringer type.
You will hear the corresponding ringer
tone.
7
Press
(OFF)
.
Setting the ringer type
You can select a ringer type of the handset from four type.
DIRECTORY AREA
RINGER
RINGER 1
SELECTED
Turn
Press
LINE1 LINE2
Telephone Features
43
US
Telephone Features
RINGER OFF
SELECTED
Turning off the ringer of the handset
1
Perform steps 1 to 5 on page 42.
2
Press
(0)
.
You will hear a confirmation beep.
3
Press
(OFF)
.
When “RINGER” is set to “RINGER OFF”
The handset won’t ring. You can still make calls, and also receive
calls if another telephone connected to the same line rings to inform
you on incoming calls.
To turn the ringer on again
Follow the instructions described in “Setting the ringer type” on
page 42.
44
US
Telephone Features
You can easily switch between the handset and speakerphone on the
base phone without disconnecting the call. The call on line 1 will be
switched to line 1 on another phone and that on line 2 is switched to
line 2.
To switch from the base phone to the handset
Example: While talking on line 1:
1
Press
(HOLD)
on the base phone.
The call is on hold and “HOLD”
appears on the display and the
LINE 1 button flashes slowly.
2
Press
(LINE 1)
on the handset.
The LINE 1 button on the handset
lights up and the LINE 1 button on
the base phone double flashes in
succession.
You can continue talking to the
caller through the handset.
To switch from the handset to the base phone
Example: While talking on line 1:
1
Press
(HOLD)
on the handset.
The call is on hold and “HOLD”
appears on the display and the
LINE 1 button flashes slowly.
2
Press
(LINE 1)
on the base phone.
The LINE 1 button on the base
phone lights up and the LINE 1
button on the handset double
flashes in succession.
You can continue talking to the
caller through the speakerphone.
Tip
While talking through the speakerphone on the base phone (or handset), if you
press
(LINE 1)
or
(LINE 2)
which is flashing on the handset (or base phone), you
can talk to the base phone (or handset) and to the line connected.
Switching the phones during a call
(LINE 1)
(LINE 1)
Telephone Features
45
US
Telephone Features
To talk from the base
phone to the handset
Press
(INTERCOM)
on the base phone.
The base phone and handset ring and
“
**
PAGING
**
” appears on the
display.
When a person at the handset presses
(INTERCOM)
, you can talk with each
other.
“INTERCOM” appears on the display
and the INTERCOM lamp on the base
phone lights up .
When you are done talking or if no
one answers the phone
Press
(OFF)
on the base phone.
Talking between the phones (Intercom)
You can converse using the base phone and the handset. You can start
the intercom from either phone.
To talk from the handset to
the base phone
Press
(INTERCOM)
on the handset.
After the base phone rings twice, you
will be connected automatically.
When a person at the base phone
answers, you can talk with each other.
“INTERCOM” appears on the display
and the INTERCOM lamp on the base
phone lights up.
When you are done talking or if no
one answers the phone
Press
(OFF)
on the handset.
INTERCOM lamp
(OFF)
continued
(OFF)
Summary of Contents for SPP-IM977
Page 26: ...SPP IM977 ...
Page 36: ......
