– 4 –
Getting Started
10
US
Step 2
Away from television
sets and other
electronic equipment
Away from a microwave
oven
Away from excessive
moisture, extremely low
temperatures, dust,
mechanical vibration, or
shock
Away from a personal
computer
Away from another
cordless telephone
Near a central location
and on a level surface
Away from heat sources, such as radiators,
airducts, and sunlight
Away from noise sources such as a window
by a street with heavy traffic
CAUTION: • Should you experience intermittent loss of audio during a conversation, try
moving closer to the base or move base phone away from other noise sources.
• The cordless telephone operates at a frequency that may cause interference to
nearby TVs and VCRs; the base phone should not be placed near or on the top
of a TV or VCR; and, if interference is experienced, moving the cordless
telephone farther away from the TV or VCR will often reduce or eliminate the
interference.
Setting up the base phone
Do the following steps:
• Choose the best location
• Connect the base phone
• Choose the dialing mode
Choose the best location
Where you place the base phone affects the reception quality of the
handset.
Getting Started
11
US
Getting Started
continued
1
Connect the telephone line cord
to the L1/L1+L2 jack and to a
telephone outlet.
2
Connect the AC power adaptor
to the DC IN 9V jack and to an
AC outlet.
3
Raise the antenna. Make sure it
points towards the ceiling.
Hook the cord.
To L1/L1+L2
3
Connect the base phone
If you want to hang the base phone on the wall, see page 63.
To connect the base phone to a single outlet having two lines
To DC IN 9V
To an AC outlet
To the
telephone outlet
Telephone line cord
(supplied)
1
AC power adaptor
(supplied AC-T128)
2
DATA jack
Getting Started
12
US
Step 2: Setting up the base phone (continued)
1
Connect the telephone line
cords to the L1/L1+L2 and L2
jacks and to the telephone
outlets.
2
Connect the AC power adaptor
to the DC IN 9V jack and to an
AC outlet.
3
Raise the antenna. Make sure it
points towards the ceiling.
Hook the cord.
To L2
3
To DC IN 9V
To an AC outlet
To the
telephone outlets
Telephone line cord (supplied)
1
AC power adaptor
(supplied AC-T128)
2
DATA jack
To connect the base phone to two separate outlets
To L1/L1+L2
Telephone line cord (supplied)
Line 1
Line 2
Getting Started
13
US
Getting Started
Notes
• Use only the supplied AC-T128 AC power adaptor.
Do not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power
supply.
• Place the base phone close to the AC outlet so that
you can unplug the AC power adaptor easily.
Tips
• If your telephone outlet is not modular, contact your
telephone service company for assistance.
• L1 is the first phone line connected to center pair of
wires. L2 is the second phone line connected to outer
pair of wires.
Connecting a computer or FAX
You can connect a computer or FAX, etc. to the
DATA jack.
Notes
• L2 jack is used for receiving or sending
computer or FAX data in addition to making
or receiving calls.
If a call comes in on L2 jack with the “call waiting” service while a
computer or FAX connected to the DATA jack is receiving or sending
data, that data may be effected.
If you have data communication frequently, we recommend that you
and your callers use L2 jack for data communication only.
• If you have only single outlet having one line, connect the telephone
line cord to the L2 jack.
Polarity of the plug
Modular
–
+
L1
L2
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing mode
(tone or pulse).
Depending on your dialing system, set the DIAL
MODE switch as follows:
If your dialing system is
Set the switch to
Tone
TONE
Pulse
PULSE
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set
to TONE.
If the call connects, leave the switch as is;
otherwise, set to PULSE.
DIAL MODE
switch
Computer
or
FAX
To DATA
SPP-IM977
To L1/L1+L2
and/or L2
Summary of Contents for SPP-IM977
Page 26: ...SPP IM977 ...
Page 36: ......
