Features
The 1/2.8 type Exmor CMOS camera (utilising
approximately 2 million valid pixels) allows for high-
definition shooting with superior picture quality.
Adopts 30 times optical magnification, F1.6 high
power and luminous zoom lens.
By adopting its wide and dynamic range functions,
you can see the optimised shooting image which
incorporates bright and dark subjects at the same
time.
Adopts the industry standard RS-232 interface of
VISCA camera protocol in external communication.
It is possible to operate from long distances by using
both RS-232 and RS-422.
You can install the camera on ceilings due to the
functions of high-speed and wide range pan/tilt
action and vertical image flip.
You can use the infrared remote commander to set
the camera and also to select panning, tilting and
zooming from the setting menu.
You can store up to 16 kinds of camera direction and
camera status into the camera. In the case of the
infrared remote commander, 6 kinds can be stored.
You can use the LAN cable for external
communication. This will make system construction
easier.
The camera can be set for a variety of HD video
formats and has an HDMI interface terminal. The
HDMI video interface is in widespread use.
