Help Guide
SRS-BTV5
Top
>
Phone calls
>
Phone calls
>
Getting Started
BLUETOOTH
One touch connection (NFC)
Music
Phone calls
Troubleshooting
Important information
Contents list
Receiving a call
When an incoming call arrives, a ring tone will be heard via the system.
The ring tone differs in the following ways, depending on your smartphone or mobile phone.
ring tone set on the system
ring tone set on the smartphone or mobile phone
ring tone set on the smartphone or mobile phone only for a BLUETOOTH connection
1.
Connect the system with a BLUETOOTH device.
2.
Press the
button on the system.
Note
If you received a call using your smartphone or mobile phone, some smartphones or
mobile phones may have handset use priority. In the case of the HFP connection, talk
on the system by pressing the
button on the system for about 2 seconds, or using
your smartphone or mobile phone. For details, refer to the manual supplied with your
smartphone or mobile phone.
To adjust the volume
Press the VOL +/– button.
The system beeps when set to the lowest (0) or highest volume level.
Tips
You cannot adjust the volume when not talking.
If the caller cannot or can barely hear your voice, talk into the microphone of the system.
To end a call
Press the
button on the headset.
To turn off the system
1.
Disconnect the BLUETOOTH connection using the smartphone or mobile phone.
2.
Slide the POWER switch of the system to turn it off.
The (BLUETOOTH) indicator (blue) goes off.
© 2012 Sony Corporation
38