Personal Audio System
SRS-X11
Terminating the BLUETOOTH connection (After use)
When you finish playing music with the BLUETOOTH device, perform any of the following operations to terminate the
BLUETOOTH connection.
Turn off the BLUETOOTH function on the BLUETOOTH device. For details, refer to the operating instructions supplied
with the device.
Turn off the BLUETOOTH device.
Turn off the speaker.
Touch the NFC-compatible device on the speaker again (if your device has the NFC function).
When using the speaker add function, touch the NFC-compatible device on the speaker where the
(BLUETOOTH)
indicator is lit. A speaker where the
(BLUETOOTH) indicator turns off is not capable of terminating the BLUETOOTH
connection.
Hint
The speaker turns off automatically by the auto power off function when the speaker satisfies the following conditions,
and the BLUETOOTH connection is terminated.
No operation on the speaker.
No BLUETOOTH connection has been established between the speaker and a smartphone or mobile via HFP/HSP.
No music (sound) is played when the speaker is connected to a BLUETOOTH device.
When using the speaker add function, if you turn off one speaker, the other speaker is automatically turned off. The
BLUETOOTH connection between them is disconnected.
When you finish playing music, the BLUETOOTH connection may terminate automatically depending on the
BLUETOOTH device.
To disconnect the smartphone by one touch (NFC), the app may need to be running on the smartphone depending on
the smartphone.
Related Topic
Disconnecting the NFC-compatible device by one touch (NFC)
4-568-649-11(1)
Copyright 2015 Sony Corporation
How to Use
63
