Personal Audio System
SRS-X7
Initializing the speaker
With the speaker turned on, press and hold the VOL (volume) – button and the
(on/standby) button at the same
time for more than 5 seconds.
When the speaker receives the signal, the
(on/standby) button flashes in green quickly for about two seconds.
The speaker is initialized, and it enters the standby mode. All settings of the speaker return to their factory defaults. All
the pairing information and all the network settings are deleted.
Notes on use
4-537-384-11(2)
Copyright 2014 Sony Corporation
Help Guide
Troubleshooting
274