Sony SRS-X88 Help Manual Download

Page: 256 / 364

the LINK indicator to light up.

The connection is complete.

10. Connect the PC to the wireless router to be used.

Hint

If you want to set a fixed IP address, set in the screen in step 6 above.

When the connection of the speaker to your Wi-Fi network has completed, connect your computer to the previous

destination or your wireless router.

Note

This procedure needs to be completed within 30 minutes. If you cannot complete within 30 minutes, start over from

step 2.

Until you finish the Wi-Fi network setting, it will not be protected. The Wi-Fi network will be protected again after

setting the Wi-Fi security.

When you connect the speaker to a Wi-Fi network for the first time after purchase, the BLUETOOTH/Network standby

function is turned on automatically.

Summary of Contents for SRS-X88




















































































































































































































































































































































Search results

Summary of Contents for SRS-X88

Reviews:

Related manuals for SRS-X88

Brands by name

Popular brands

Sony SRS-X88, Help Manual

Search results

Summary of Contents for SRS-X88

Reviews:

Related manuals for SRS-X88

Brands by name

Popular brands